Research has shown, that babies sleep better with rocking ... and with the Bed Adapter you can also attach Sleepytroll to the crib, bed or park! The Bed Adapter can be mounted quickly and easily, although only on top rails with a rectangular cross-section (thickness between 1 - 3,7cm). Mounting on rails with a cylindrical cross-section is not recommended for safety reasons and can damage the Sleepytroll Baby Rocker.
If the crib or crib cannot (yet) be rocked by hand, you must also purchase the Bed Rocker Feet. These handy "feet" can only be mounted on cribs, beds or parks with wooden legs, which do not weigh more than 22kg. The Bed Adaptor comes with a socket for mounting.
One of the many challenges of parenthood is trying to calm an inconsolable baby. Fortunately, there are a number of 'tricks' that can help! One of the best-known is rocking. This can, of course, be done in mum's or dad's arms... But today there are practical and safe aids available ... that leave your hands free for other things!
Is your baby’s bed already rockable by hand? Then you might not need the 'Bed Rocker Feet'. Is there somewhere to add the Sleepytroll vertically (important!) on the bed? Then you might not need the 'Bed Adapter'. However, if you are not able to rock the bed by hand and there is nowhere to hang Sleepytroll vertically on the bed you would need both.
The Sleepytroll should always be mounted vertically, as mounting it in any other ways will put excessive pressure on the motor. It is also important to tighten the strap, as the stroller/car seat/crib should be moving, not the Sleepytroll. Close charger port when charging is finished. Sleepytroll can be used in temperatures from -10C/14F to 35C/95F. Please read the manual for information on the correct storage when storing over time.